OEM VERIFIED BENCH

OFFICIAL FAULT CODEE115

Bosch // OFFICIAL DIAGNOSTIC BENCH

Bosch E115

OvenNTC Temperature Sensor & Thermistor

Oven

Other Brands Sharing Code E115:SiemensE115 NeffE115 GaggenauE115

Symptom / Description

FAULT

Bosch Serie 6 / Serie 8 4D Hotair & EcoClean Direct Pyrolytic Oven: Cavity high-limit safety temperature trip E115; oven temperature exceeds maximum safety limit (> 350°C), heating disabled.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

On Bosch ovens: Welded heating element relay on power PCB keeping elements continuously powered, cooling fan failure during pyrolytic cleaning, or NTC drift.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

1Allow oven to cool completely. Test power board relays for welded contacts when de-energized. Inspect manual-reset thermal cutout switch on rear chassis. Turn function selector to 0, isolate power at circuit breaker for 60 seconds, restore power and set the digital clock.

AI diagnostic workshop engine analyzing appliance circuit schematics and error telemetry in real time

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide Bosch Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLNTC Temperature Sensor & ThermistorOven / Microwave

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

Precision digital multimeter probes measuring electrical resistance in Ohms on an appliance control board

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

4.8kΩ–12kΩ (at 20°C–25°C)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:NTC Temperature Sensor Probe (Thermistor)

Test Pins & Connections

PROBE (+)

PROBE (-)

Across sensor pins 1-2 (unplugged harness)

Tolerance & Diagnostic CriteriaNegative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit.

1. Pre-Intervention Electrical Safety Protocols

!Electrical Safety Protocol: Disconnect 230V electrical mains power before removing appliance side or rear panels.
!Ensure tub water or heating chamber has cooled below 30°C before unclipping thermistor probe.
!Use CAT III 600V/1000V insulated test probes when tng at PCB edge connectors.

3. Preliminary Mechanical & Visual Checks

Inspect sensor immersion sleeve for calcification, limescale scale, or thermal paste degradation.
Check wiring harness for pinch points, chafing against chassis metal, and terminal pin oxidation.
Verify probe is firmly seated in its rubber grommet or bracket inside the water/air circuit.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: Bosch E115

FAQ TREE

What does error code E115 mean on a Bosch appliance?

Bosch error code E115 indicates: Bosch Serie 6 / Serie 8 4D Hotair & EcoClean Direct Pyrolytic Oven: Cavity high-limit safety temperature trip E115; oven temperature exceeds maximum safety limit (> 350°C), heating disabled..

What is the root cause of Bosch error code E115?

The primary root cause for Bosch code E115 is: On Bosch ovens: Welded heating element relay on power PCB keeping elements continuously powered, cooling fan failure during pyrolytic cleaning, or NTC drift..

How do I fix or resolve Bosch error code E115?

To resolve error code E115: Allow oven to cool completely. Test power board relays for welded contacts when de-energized. Inspect manual-reset thermal cutout switch on rear chassis. Turn function selector to 0, isolate power at circuit breaker for 60 seconds, restore power and set the digital clock.

Is it safe to clear Bosch error code E115 by resetting power?

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Bosch code E115 persists, the physical component causing On Bosch ovens: Welded heating element relay on power PCB keeping elements continuously powered, cooling fan failure during pyrolytic cleaning, or NTC drift. must be inspected or replaced.

How do I test electrical resistance for Bosch code E115 using a multimeter?

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

What safety protocol must be followed before servicing Bosch code E115?

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.

Community Verification

COMMUNITY

Did this solution resolve the issue?

Back to Search

OEM VERIFIED BENCH

OFFICIAL FAULT CODEE115

Bosch // OFFICIAL DIAGNOSTIC BENCH

Bosch E115

OvenNTC Temperature Sensor & Thermistor

Oven

Other Brands Sharing Code E115:SiemensE115 NeffE115 GaggenauE115

Symptom / Description

FAULT

Bosch Serie 6 / Serie 8 4D Hotair & EcoClean Direct Pyrolytic Oven: Cavity high-limit safety temperature trip E115; oven temperature exceeds maximum safety limit (> 350°C), heating disabled.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

On Bosch ovens: Welded heating element relay on power PCB keeping elements continuously powered, cooling fan failure during pyrolytic cleaning, or NTC drift.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide Bosch Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLNTC Temperature Sensor & ThermistorOven / Microwave

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

4.8kΩ–12kΩ (at 20°C–25°C)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:NTC Temperature Sensor Probe (Thermistor)

Test Pins & Connections

PROBE (+)

PROBE (-)

Across sensor pins 1-2 (unplugged harness)

Tolerance & Diagnostic CriteriaNegative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit.

1. Pre-Intervention Electrical Safety Protocols

!Electrical Safety Protocol: Disconnect 230V electrical mains power before removing appliance side or rear panels.
!Ensure tub water or heating chamber has cooled below 30°C before unclipping thermistor probe.
!Use CAT III 600V/1000V insulated test probes when tng at PCB edge connectors.

3. Preliminary Mechanical & Visual Checks

Inspect sensor immersion sleeve for calcification, limescale scale, or thermal paste degradation.
Check wiring harness for pinch points, chafing against chassis metal, and terminal pin oxidation.
Verify probe is firmly seated in its rubber grommet or bracket inside the water/air circuit.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: Bosch E115

FAQ TREE

What does error code E115 mean on a Bosch appliance?

What is the root cause of Bosch error code E115?

How do I fix or resolve Bosch error code E115?

Is it safe to clear Bosch error code E115 by resetting power?

How do I test electrical resistance for Bosch code E115 using a multimeter?

What safety protocol must be followed before servicing Bosch code E115?

Community Verification

COMMUNITY

Did this solution resolve the issue?

Bosch E115

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: Bosch E115

Community Verification

Related Bosch Oven / Microwave Error Codes

Bosch E115

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: Bosch E115

Community Verification

Related Bosch Oven / Microwave Error Codes