Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: Bosch ER 4
FAQ TREEWhat does error code ER 4 mean on a Bosch appliance?
Bosch error code ER 4 indicates: Temperature sensor short circuit detected, oven does not heat..
What is the root cause of Bosch error code ER 4?
The primary root cause for Bosch code ER 4 is: Short circuit of the temperature sensor PT500..
How do I fix or resolve Bosch error code ER 4?
To resolve error code ER 4: Check and replace the temperature sensor. The error clears automatically after repeated correct temperature measurements.
Is it safe to clear Bosch error code ER 4 by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Bosch code ER 4 persists, the physical component causing Short circuit of the temperature sensor PT500. must be inspected or replaced.
How do I test electrical resistance for Bosch code ER 4 using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..
What safety protocol must be followed before servicing Bosch code ER 4?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



