Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: FAGOR AS
FAQ TREEWhat does error code AS mean on a FAGOR appliance?
FAGOR error code AS indicates: Fagor Innova Induction / IF / 2IF / 3IF High-Power Cooktop: Auto-Stop safety timeout triggered AS; all induction cooking zones shut down automatically after liquid spillover or prolonged cooking..
What is the root cause of FAGOR error code AS?
The primary root cause for FAGOR code AS is: On FAGOR cooktops utilizing Innova high-frequency induction generator, ferromagnetic pan detection resonance, and rapid booster stages: Boiling liquid overflowed onto capacitive touch keys, metallic utensil left on keys, or unattended cooking timeout reached..
How do I fix or resolve FAGOR error code AS?
To resolve error code AS: Remove hot cookware and wipe glass surface completely clean and dry with a dry cloth. Touch the master On/Off key to resume normal cooking. Clear and dry cooktop surface, disconnect mains power breaker for 60 seconds, reconnect and hold Key Padlock sensor for 5 seconds.
Is it safe to clear FAGOR error code AS by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if FAGOR code AS persists, the physical component causing On FAGOR cooktops utilizing Innova high-frequency induction generator, ferromagnetic pan detection resonance, and rapid booster stages: Boiling liquid overflowed onto capacitive touch keys, metallic utensil left on keys, or unattended cooking timeout reached. must be inspected or replaced.
How do I test electrical resistance for FAGOR code AS using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test Mechanical Pressure Switch Contacts / Inductive Frequency Sensor across Across switch spade contacts with harness unplugged; electronic output: 40Hz–50Hz frequency signal. Expected nominal reading is Mechanical: Continuity 0.0Ω–0.2Ω (Empty: 11-12, Full: 11-14). Electronic: 20Ω–45Ω coil resistance.. Tolerance: Mechanical switch contacts must transition cleanly on gentle breath pressure. Coil ~22Ω ±5%..
What safety protocol must be followed before servicing FAGOR code AS?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



