Haier E5 — Dishwasher
[ACTIVE]Haier I-Pro Shine / Washlogix Ultra Silence Dishwasher: Wash water temperature NTC sensor error E5; thermistor reading open-circuit or short-circuit outside allowable range.
On Haier dishwashers powered by I-Pro Shine Ultra Silence brushless wash circulation pump, dual-zone inverter spray system, and micro-filtration: Defective NTC thermistor bead in sump, corroded connector terminals from detergent seepage, or damaged wiring harness.
Disconnect NTC connector at sump. Measure thermistor resistance (nominal ~47 kΩ at 25°C or ~10 kΩ depending on platform). Replace probe if open. Press Power button off, hold Half Load and Start buttons together while powering on until diagnostic test mode 01 displays, then power off.



