Siemens E31 — Dishwasher
[ACTIVE]Siemens iQ300 / iQ500 / iQ700 / iQ800 studioLine Zeolith & varioSpeed Plus: Zeolith heat pump overheating safety trip E31; thermal cutout on drying container activated.
On Siemens dishwashers: Blocked drying air inlet or exhaust inside tub, fan blower failed during regeneration, or water entered zeolite container.
Check drying air outlet cap in right rear corner of tub for obstructions. Measure Zeolith heater resistance (nominal ~35–45 Ω). Check thermal fuse continuity. Press and hold Start button for 4 seconds until display indicates '0:01', wait for evacuation pump, then power off.



