OEM VERIFIED BENCH

OFFICIAL FAULT CODEi60

V-Zug // OFFICIAL DIAGNOSTIC BENCH

V-Zug i60

DishwasherNTC Temperature Sensor & Thermistor

Dishwasher

Other Brands Sharing Code i60:ElectroluxI60 AEGI60 ZanussiI60 Arthur MartinI60 SchulthessI60 CastorI60 FaureI60 ForsI60 KelvinatorI60 PhilcoI60

Symptom / Description

FAULT

V-Zug I60: NTC temperature sensor signal out of range (open or short circuit) in Dishwasher.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

The water is not heating up. This can be caused by a faulty heating element, a defective NTC temperature sensor, or a problem on the main control board.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

1The appliance may complete the cycle with cold water, resulting in poor cleaning. A service technician is required to diagnose and replace the faulty component.

AI diagnostic workshop engine analyzing appliance circuit schematics and error telemetry in real time

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide V-Zug Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLNTC Temperature Sensor & ThermistorDishwasher

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

Precision digital multimeter probes measuring electrical resistance in Ohms on an appliance control board

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

4.8kΩ–12kΩ (at 20°C–25°C)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:NTC Temperature Sensor Probe (Thermistor)

Test Pins & Connections

PROBE (+)

PROBE (-)

Across sensor pins 1-2 (unplugged harness)

Tolerance & Diagnostic CriteriaNegative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit.

1. Pre-Intervention Electrical Safety Protocols

!Electrical Safety Protocol: Disconnect 230V electrical mains power before removing appliance side or rear panels.
!Ensure tub water or heating chamber has cooled below 30°C before unclipping thermistor probe.
!Use CAT III 600V/1000V insulated test probes when tng at PCB edge connectors.

3. Preliminary Mechanical & Visual Checks

Inspect sensor immersion sleeve for calcification, limescale scale, or thermal paste degradation.
Check wiring harness for pinch points, chafing against chassis metal, and terminal pin oxidation.
Verify probe is firmly seated in its rubber grommet or bracket inside the water/air circuit.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: V-Zug I60

FAQ TREE

What does error code I60 mean on a V-Zug appliance?

V-Zug error code I60 indicates: V-Zug I60: NTC temperature sensor signal out of range (open or short circuit) in Dishwasher..

What is the root cause of V-Zug error code I60?

The primary root cause for V-Zug code I60 is: The water is not heating up. This can be caused by a faulty heating element, a defective NTC temperature sensor, or a problem on the main control board..

How do I fix or resolve V-Zug error code I60?

To resolve error code I60: The appliance may complete the cycle with cold water, resulting in poor cleaning. A service technician is required to diagnose and replace the faulty component.

Is it safe to clear V-Zug error code I60 by resetting power?

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if V-Zug code I60 persists, the physical component causing The water is not heating up. This can be caused by a faulty heating element, a defective NTC temperature sensor, or a problem on the main control board. must be inspected or replaced.

How do I test electrical resistance for V-Zug code I60 using a multimeter?

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

What safety protocol must be followed before servicing V-Zug code I60?

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.

Community Verification

COMMUNITY

Did this solution resolve the issue?

Back to Search

OEM VERIFIED BENCH

OFFICIAL FAULT CODEi60

V-Zug // OFFICIAL DIAGNOSTIC BENCH

V-Zug i60

DishwasherNTC Temperature Sensor & Thermistor

Dishwasher

Other Brands Sharing Code i60:ElectroluxI60 AEGI60 ZanussiI60 Arthur MartinI60 SchulthessI60 CastorI60 FaureI60 ForsI60 KelvinatorI60 PhilcoI60

Symptom / Description

FAULT

V-Zug I60: NTC temperature sensor signal out of range (open or short circuit) in Dishwasher.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

The water is not heating up. This can be caused by a faulty heating element, a defective NTC temperature sensor, or a problem on the main control board.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

1The appliance may complete the cycle with cold water, resulting in poor cleaning. A service technician is required to diagnose and replace the faulty component.

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide V-Zug Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLNTC Temperature Sensor & ThermistorDishwasher

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

4.8kΩ–12kΩ (at 20°C–25°C)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:NTC Temperature Sensor Probe (Thermistor)

Test Pins & Connections

PROBE (+)

PROBE (-)

Across sensor pins 1-2 (unplugged harness)

Tolerance & Diagnostic CriteriaNegative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit.

1. Pre-Intervention Electrical Safety Protocols

!Electrical Safety Protocol: Disconnect 230V electrical mains power before removing appliance side or rear panels.
!Ensure tub water or heating chamber has cooled below 30°C before unclipping thermistor probe.
!Use CAT III 600V/1000V insulated test probes when tng at PCB edge connectors.

3. Preliminary Mechanical & Visual Checks

Inspect sensor immersion sleeve for calcification, limescale scale, or thermal paste degradation.
Check wiring harness for pinch points, chafing against chassis metal, and terminal pin oxidation.
Verify probe is firmly seated in its rubber grommet or bracket inside the water/air circuit.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: V-Zug I60

FAQ TREE

What does error code I60 mean on a V-Zug appliance?

V-Zug error code I60 indicates: V-Zug I60: NTC temperature sensor signal out of range (open or short circuit) in Dishwasher..

What is the root cause of V-Zug error code I60?

The primary root cause for V-Zug code I60 is: The water is not heating up. This can be caused by a faulty heating element, a defective NTC temperature sensor, or a problem on the main control board..

How do I fix or resolve V-Zug error code I60?

To resolve error code I60: The appliance may complete the cycle with cold water, resulting in poor cleaning. A service technician is required to diagnose and replace the faulty component.

Is it safe to clear V-Zug error code I60 by resetting power?

How do I test electrical resistance for V-Zug code I60 using a multimeter?

What safety protocol must be followed before servicing V-Zug code I60?

Community Verification

COMMUNITY

Did this solution resolve the issue?

V-Zug i60

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: V-Zug I60

Community Verification

Related V-Zug Dishwasher Error Codes

V-Zug i60

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: V-Zug I60

Community Verification

Related V-Zug Dishwasher Error Codes