Zanussi E70 — Dryer
[ACTIVE]Zanussi AutoSense / ZDH Series Condenser Dryer: Temperature sensor NTC general error E70; electronic control fails to read valid analog temperature input.
On Zanussi (Zanussi AutoSense / ZDH Series Condenser Dryer) models: NTC sensor open circuit or shorted, corroded connector terminals at sensor probe, broken harness wire flexed during drum vibration.
Locate NTC probe in front air duct. Measure resistance with multimeter (expected 4.8–6.0 kΩ at 25°C, dropping to ~1.2 kΩ at 60°C). Hold Start/Pause plus Skip/Option button simultaneously for 5 seconds until three rapid confirmation beeps clear persistent error memory.



