CodesErreur Logo
CodesErreur.comPowered by CodesErreur
Database
Tools
Diagnostic ToolsNew Parts Locator
Community
CertificationsPRO Top Techs
B2B Services
Brands Manuals Specialists Job Board Elite Forum Academy
Premium
CodesErreur Logo

CodesErreur.com

Premium appliance diagnostics & repair database.
Powered by AI to help certified technicians worldwide.

Trusted by professionals in CH & FR

Platform

Error Code SearchAI Diagnostic ChatBrand Pokedex

Professionals

Elite Tech ForumElite Job BoardPremium Memberships

Corporate

Terms of UsePrivacy Policy

SAFETY DISCLAIMER

The technical information, diagnostic guides, error codes, and AI-generated suggestions provided on this website are intended exclusively for certified and qualified professionals. Appliance repair involves severe electrical hazards, high voltages, and mechanical risks that can result in fatal injury or severe property damage. If you are not a trained technician, do not attempt to repair any appliances. CodesErreur assumes no responsibility or liability for any damage, injury, or consequential losses resulting from the use of the information provided on this platform. You use all information entirely at your own risk.

© 2026 CodesErreur. All rights reserved.

Terms of Service Privacy Policy
Back to Search

Faure Error Codes & Diagnostics

Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Faure home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.

19 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
CodeFault / DiagnosticsAppliancesAction
A1
High temperature alarm in freezer.
Info: The freezer temperature has risen to an unsafe level. This could be due to the door being left open, a power outage, or a fault in the cooling system.
Refrigerator
A1 Full Steps Diagnose
C3
Leak detected or anti-flood system activated.
Info: Water has collected in the base of the appliance, triggering the anti-flood float switch.
Washing Machine
C3 Full Steps Diagnose
EH0
Power supply issue.
Info: The appliance has detected an incorrect voltage or frequency from the mains power supply.
Washing Machine
EH0 Full Steps Diagnose
E10
Water fill fault, machine not taking in water.
Info: The water tap is turned off, the inlet hose is kinked or blocked, or the water inlet valve has failed.
Washing Machine
E10 Full Steps Diagnose
E20
Drainage fault, machine is not emptying water.
Info: The drain filter is clogged, the drain hose is blocked or kinked, or the drain pump is faulty.
Washing Machine
E20 Full Steps Diagnose
E40
Door lock fault, door will not lock or unlock.
Info: The door is not closed properly, or the door lock mechanism is faulty.
Washing Machine
E40 Full Steps Diagnose
E52
Motor fault, drum not turning.
Info: No signal from the motor tacho generator. This could be due to a faulty motor, worn carbon brushes, or a wiring issue.
Washing Machine
E52 Full Steps Diagnose
E61
Heating fault, water is not heating.
Info: The heating element has failed, or the temperature sensor (NTC) is faulty.
Washing Machine
E61 Full Steps Diagnose
E90
Control board communication error.
Info: A communication fault between the main control board (PCB) and the display board, or a configuration error.
Washing Machine
E90 Full Steps Diagnose
F1
Refrigerator sensor fault.
Info: The temperature sensor in the refrigerator compartment is faulty (open or shorted).
Refrigerator
F1 Full Steps Diagnose
F2
Freezer sensor fault.
Info: The temperature sensor in the freezer compartment is faulty (open or shorted).
Refrigerator
F2 Full Steps Diagnose
F3
Temperature sensor (probe) fault.
Info: The oven's temperature probe (NTC sensor) has an open circuit or short circuit.
Oven
F3 Full Steps Diagnose
F4
Door lock mechanism error during pyrolytic cleaning.
Info: The door lock motor has failed or is jammed, preventing the door from locking or unlocking for the high-temperature cleaning cycle.
5 Elite Techs Verified
Oven
F4 Full Steps Diagnose
F8
Communication error between boards.
Info: There is a loss of communication between the main power board and the user interface or display board.
Oven
F8 Full Steps Diagnose
i10
Water inlet time-out. Dishwasher is not filling with water.
Info: Water supply is off, inlet hose is kinked, or the filter is blocked.
Dishwasher
i10 Full Steps Diagnose
i20
Draining issue. Dishwasher is not emptying.
Info: Filters are dirty, drain hose is blocked, or the drain pump is jammed.
Dishwasher
i20 Full Steps Diagnose
i30
Anti-flood device has been activated.
Info: A water leak has been detected in the base of the machine.
Dishwasher
i30 Full Steps Diagnose
i50
Wash motor or circulation pump fault.
Info: The circulation pump motor is jammed, has failed, or its control board is faulty.
Dishwasher
i50 Full Steps Diagnose
i60
Water heating problem.
Info: The heating element has failed, the temperature sensor is faulty, or there's an issue with the main control board.
Dishwasher
i60 Full Steps Diagnose