CodesErreur Logo
CodesErreur.comPowered by CodesErreur
Database
Tools
Diagnostic ToolsNew Parts Locator
Community
CertificationsPRO Top Techs
B2B Services
Brands Manuals Specialists Job Board Elite Forum Academy
Premium
CodesErreur Logo

CodesErreur.com

Premium appliance diagnostics & repair database.
Powered by AI to help certified technicians worldwide.

Trusted by professionals in CH & FR

Platform

Error Code SearchAI Diagnostic ChatBrand Pokedex

Professionals

Elite Tech ForumElite Job BoardPremium Memberships

Corporate

Terms of UsePrivacy Policy

SAFETY DISCLAIMER

The technical information, diagnostic guides, error codes, and AI-generated suggestions provided on this website are intended exclusively for certified and qualified professionals. Appliance repair involves severe electrical hazards, high voltages, and mechanical risks that can result in fatal injury or severe property damage. If you are not a trained technician, do not attempt to repair any appliances. CodesErreur assumes no responsibility or liability for any damage, injury, or consequential losses resulting from the use of the information provided on this platform. You use all information entirely at your own risk.

© 2026 CodesErreur. All rights reserved.

Terms of Service Privacy Policy
Back to Search

Ignis Error Codes & Diagnostics

Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Ignis home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.

18 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
CodeFault / DiagnosticsAppliancesAction
AL01
Refrigerator compartment is too cold or not cold enough
Info: Refrigerator air sensor (thermistor) fault.
Refrigerator
AL01 Full Steps Diagnose
AL03
Freezer compartment is defrosting or over-freezing
Info: Freezer air sensor (thermistor) fault.
Refrigerator
AL03 Full Steps Diagnose
CF
Display is not working correctly or fridge is not cooling
Info: Communication Failure between the main control board and the display board.
Refrigerator
CF Full Steps Diagnose
FH
Machine does not fill with water or fills very slowly
Info: Water inlet fault (Fill Hard). The water supply is off, inlet hose is kinked, or the inlet valve is blocked or faulty.
Washing Machine
FH Full Steps Diagnose
F1
Dishes are not cleaned properly, cycle may stop
Info: NTC (temperature sensor) fault. The dishwasher cannot correctly read the water temperature.
Dishwasher
F1 Full Steps Diagnose
F02
Machine won't spin or drum won't turn
Info: Motor circuit fault. The motor is jammed, the tacho connection is loose, or the motor brushes are worn.
Washing Machine
F02 Full Steps Diagnose
F2
Dishwasher has stopped and may have water in the base
Info: Water leak detected. The anti-flood switch in the base of the machine has been activated by water.
Dishwasher
F2 Full Steps Diagnose
F03
Oven overheating or not heating at all
Info: Oven temperature sensor (NTC) has an open circuit.
Oven
F03 Full Steps Diagnose
F3
Dishes are not drying, water is cold
Info: Heating system fault. The heater element, thermostat, or related wiring is faulty.
Dishwasher
F3 Full Steps Diagnose
F4
Water is left in the bottom of the dishwasher after a cycle
Info: Draining fault. The drain pump is blocked, the drain hose is blocked or kinked, or the pump is faulty.
5 Elite Techs Verified
Dishwasher
F4 Full Steps Diagnose
F05
Pyrolytic (self-clean) cycle won't start or oven door won't unlock after cleaning
Info: Door lock mechanism fault. The motor or switch for the door lock has failed.
Oven
F05 Full Steps Diagnose
F06
Door will not lock and cycle won't start
Info: Door lock mechanism fault. The machine is not detecting the door as closed.
Washing Machine
F06 Full Steps Diagnose
F6
Dishwasher won't start and makes no sound
Info: Water inlet fault. No water is entering the appliance.
Dishwasher
F6 Full Steps Diagnose
F08
Machine stops mid-cycle, usually during a heat phase
Info: Heater element fault. The heater is open circuit, or the pressure switch is stuck, preventing the heater relay from activating.
Washing Machine
F08 Full Steps Diagnose
F8
Poor wash results, excessive foam, or cycle stops
Info: Water level or turbidity sensor fault. Excessive foaming from incorrect detergent or a faulty sensor is preventing a correct reading.
Dishwasher
F8 Full Steps Diagnose
F09
Machine is dead or has flashing lights, won't start
Info: Software or memory (EEPROM) error on the main control board.
Washing Machine
F09 Full Steps Diagnose
F12
Flashing lights, machine unresponsive
Info: Communication error between the main control board and the display/user interface board.
Washing Machine
F12 Full Steps Diagnose
F23
Machine overfills or does not fill with enough water
Info: Pressure switch fault. The switch that senses the water level is providing an incorrect reading.
Washing Machine
F23 Full Steps Diagnose