| AL01 | Machine has stopped and error is displayed, possible water on floor. Info: The anti-flood or Aquastop system has been activated due to a leak detected in the base of the appliance. | Washing Machine | |
| d01 | Machine won't fill with water. Info: Water tap is closed, inlet hose is kinked or blocked, or the water inlet valve has failed. | Washing Machine | |
| d02 | Water not draining from the drum. Info: The drain filter is clogged, the drain hose is blocked or kinked, or the drain pump is faulty. | Washing Machine | |
| d03 | Water is not heating up. Info: The heating element has failed, or there is a fault with the NTC temperature sensor or its wiring. | Washing Machine | |
| d04 | Machine stops mid-cycle, motor not turning. Info: A short circuit has been detected in the motor power triac on the main control board. | Washing Machine | |
| d06 | Drum does not spin or spins erratically. Info: The motor's tacho coil is faulty or has become disconnected, preventing the board from reading the motor speed. | Washing Machine | |
| d07 | The door will not lock, or the cycle will not start. Info: The door is not closed properly, or the door lock mechanism has failed. | Washing Machine | |
| d10 | Machine has overfilled with water. Info: The water level pressure switch is faulty, or the inlet valve is stuck open. | Washing Machine | |
| d21 | Machine is unresponsive or displays error randomly. Info: Communication error between the main control board (PCB) and the display board. | Washing Machine | |
| F1 | Oven is not heating correctly or overheating. Info: The oven temperature sensor (probe) circuit is open. The sensor may be faulty or disconnected. | Oven | |
| F2 | Dishwasher does not drain the water. Info: Drain filter is clogged, drain hose is blocked, or the drain pump has failed. | Dishwasher | |
| F3 | Oven displays an error and is unresponsive. Info: EEPROM data corruption on the main control board. A power surge can sometimes cause this. | Oven | |
| F4 | Dishwasher has stopped and may be continuously draining. Info: The anti-flood float switch in the base has been activated due to a leak. | Dishwasher | |
| F5 | Door cannot be opened after a pyrolytic cleaning cycle. Info: The door lock mechanism has failed or is jammed, or the oven has not cooled down sufficiently. | Oven | |
| F6 | The water distribution system is not working correctly. Info: Fault with the alternating wash motor (water director) that switches water flow between the upper and lower spray arms. | Dishwasher | |
| F8 | Oven overheats and shuts down. Info: The cooling fan, which cools the electronics, has failed or is obstructed. | Oven | |
| F9 | Dishwasher is unresponsive or behaving erratically. Info: A fault has been detected on the main control board (PCB), often a configuration or memory error. | Dishwasher | |
