AEG E70 — Dryer
[ACTIVE]AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump: Temperature sensor NTC general error E70; electronic control fails to read valid analog temperature input.
On AEG (AEG Lavatherm / SensiDry / AbsoluteCare Heat-Pump) models: NTC sensor open circuit or shorted, corroded connector terminals at sensor probe, broken harness wire flexed during drum vibration.
Locate NTC probe in front air duct. Measure resistance with multimeter (expected 4.8–6.0 kΩ at 25°C, dropping to ~1.2 kΩ at 60°C). Rotate selector to 12 o'clock (OFF), press and hold Start/Pause and Exit simultaneously for 4 seconds until the diagnostic LED sequence resets error memory.



