Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: Airlux E4
FAQ TREEWhat does error code E4 mean on a Airlux appliance?
Airlux error code E4 indicates: Compressor exhaust high temperature protection.
What is the root cause of Airlux error code E4?
The primary root cause for Airlux code E4 is: A cooking zone has overheated. This can happen during prolonged use at maximum power or if an unsuitable/empty pan is used..
How do I fix or resolve Airlux error code E4?
To resolve error code E4: Check for refrigerant leak, blockage, or faulty exhaust temp sensor. PRO TIP: For communication (E6) and sensor errors, always check the wiring connections between the indoor and outdoor units or sensor harness before replacing parts.
Is it safe to clear Airlux error code E4 by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Airlux code E4 persists, the physical component causing A cooking zone has overheated. This can happen during prolonged use at maximum power or if an unsuitable/empty pan is used. must be inspected or replaced.
How do I test electrical resistance for Airlux code E4 using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..
What safety protocol must be followed before servicing Airlux code E4?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?