Bosch E19 — Dishwasher
[ACTIVE]Bosch Serie 4 / Serie 6 / Serie 8 ActiveWater & PerfectDry Zeolith: Dispenser actuator / heat exchanger drainage valve coil failure E19; solenoid coil open circuit or triac blown.
On Bosch dishwashers: Heat exchanger drain valve coil open circuit (nominal resistance ~900–1100 Ω), or dosage actuator thermal wax element open.
Remove left side panel. Measure resistance across heat exchanger valve solenoid (nominal ~900–1100 Ω; replace valve if open circuit). Check dispenser coil. Hold Start/Reset key for 3 seconds until '0:01' appears, close door, allow 60s for drain completion, then power off.



