Brandt d01 — Dishwasher
[ACTIVE]Brandt Hydrosafe / Aquasafe / Silence 44dB Dishwasher: Water fill timeout d01; appliance fails to fill with adequate water volume within 4 minutes of program launch.
On Brandt dishwashers featuring Hydrosafe anti-overflow hydraulic circuit, Cyclone wash system, and 44dB acoustic damping: Closed water isolation cock, clogged aquastop filter mesh, or open inlet solenoid coil (~3.8 kΩ).
Inspect tap flow rate. Unscrew hose connection and clean the inline strainer. Measure aquastop solenoid resistance (~3.8 kΩ). Press and hold the Start/Cancel button for 4 seconds until the status LED stops flashing, close door to allow 30s drainage, then power off.



