De Dietrich Er00

De Dietrich error code ER00 indicates: De Dietrich ICS (Intelligent Cooking System) / Fascination / Corium Pyrolytic Oven: Electronic programmer time clock error Er00; display flashes '00:00' or error code and refuses to begin heating mode..

The primary root cause for De Dietrich code ER00 is: On De Dietrich built-in ovens featuring ICS sensor-guided automated culinary cooking, PT500 platinum thermal probe (~540 Ω at 20°C), and 480°C Pyro-Turbo cleaning: Mains supply blackout interruption clearing time-of-day memory or corrupted clock chip oscillator..

To resolve error code ER00: Press and hold the Clock or Timer button for 3 seconds, adjust the current time with selector knobs, and confirm with OK. Rotate rotary knob to zero, disconnect power at the master breaker panel for 90 seconds, re-engage and validate time on the ICS interface.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if De Dietrich code ER00 persists, the physical component causing On De Dietrich built-in ovens featuring ICS sensor-guided automated culinary cooking, PT500 platinum thermal probe (~540 Ω at 20°C), and 480°C Pyro-Turbo cleaning: Mains supply blackout interruption clearing time-of-day memory or corrupted clock chip oscillator. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.