Field Actions
DISPATCHAlways disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.
Frequently Asked Questions: FAGOR C3
FAQ TREEWhat does error code C3 mean on a FAGOR appliance?
FAGOR error code C3 indicates: Fagor Dishwasher displays 'C3' and runs drain pump continuously even with door open or power button switched off..
What is the root cause of FAGOR error code C3?
The primary root cause for FAGOR code C3 is: Aqua-Stop safety float switch in bottom collection tray activated by internal water leakage from sump hose or pump seal..
How do I fix or resolve FAGOR error code C3?
To resolve error code C3: Disconnect power, sponge dry bottom tray, and inspect wash sump hose, door perimeter seal, and recirculation motor shaft for drips.
Is it safe to clear FAGOR error code C3 by resetting power?
Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if FAGOR code C3 persists, the physical component causing Aqua-Stop safety float switch in bottom collection tray activated by internal water leakage from sump hose or pump seal. must be inspected or replaced.
How do I test electrical resistance for FAGOR code C3 using a multimeter?
Set a digital multimeter to ohms (Ω). Disconnect power and test Mechanical Pressure Switch Contacts / Inductive Frequency Sensor across Across switch spade contacts with harness unplugged; electronic output: 40Hz–50Hz frequency signal. Expected nominal reading is Mechanical: Continuity 0.0Ω–0.2Ω (Empty: 11-12, Full: 11-14). Electronic: 20Ω–45Ω coil resistance.. Tolerance: Mechanical switch contacts must transition cleanly on gentle breath pressure. Coil ~22Ω ±5%..
What safety protocol must be followed before servicing FAGOR code C3?
Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.
Community Verification
COMMUNITYDid this solution resolve the issue?



