Gaggenau E19 — Dishwasher
[ACTIVE]Gaggenau 200 Series / 400 Series Zeolith & push-to-open dishwasher: Dispenser actuator / heat exchanger drainage valve coil failure E19; solenoid coil open circuit or triac blown.
On Gaggenau dishwashers: Heat exchanger drain valve coil open circuit (nominal resistance ~900–1100 Ω), or dosage actuator thermal wax element open.
Remove left side panel. Measure resistance across heat exchanger valve solenoid (nominal ~900–1100 Ω; replace valve if open circuit). Check dispenser coil. Press and hold illuminated Start key for 4 seconds until '0:01' abort confirms, close door for final drainage, power off.



