Rosieres Er09

Rosieres error code ER09 indicates: Rosières Sublime / Origine / Paul Bocuse Pyrolytic Oven: Stuck touch control key error Er09; capacitive glass touch pad detects continuous activation for longer than 30 seconds..

The primary root cause for Rosieres code ER09 is: On Rosières ovens powered by French culinary precision thermal regulation, Paul Bocuse pyrolytic cavity, and GIAS Cuore microcomputer controller: Grease film, liquid spillage, metal pot handle resting against touch glass, or damaged capacitive sensing spring..

To resolve error code ER09: Clean and dry the entire glass control fascia with microfiber cloth and glass cleaner. Ensure no objects touch glass. Power cycle breaker if persists. Return oven selectors to 0, switch off the kitchen circuit breaker for 60 seconds, re-engage and reset the rotary clock timer.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Rosieres code ER09 persists, the physical component causing On Rosières ovens powered by French culinary precision thermal regulation, Paul Bocuse pyrolytic cavity, and GIAS Cuore microcomputer controller: Grease film, liquid spillage, metal pot handle resting against touch glass, or damaged capacitive sensing spring. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test Mechanical Pressure Switch Contacts / Inductive Frequency Sensor across Across switch spade contacts with harness unplugged; electronic output: 40Hz–50Hz frequency signal. Expected nominal reading is Mechanical: Continuity 0.0Ω–0.2Ω (Empty: 11-12, Full: 11-14). Electronic: 20Ω–45Ω coil resistance.. Tolerance: Mechanical switch contacts must transition cleanly on gentle breath pressure. Coil ~22Ω ±5%..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.