Bosch E03 — Dishwasher
[ACTIVE]Bosch Serie 4 / Serie 6 / Serie 8 ActiveWater & PerfectDry Zeolith: Auxiliary heating relay circuit discrepancy E03; microprocessor detects inconsistent contact state across heating relays.
On Bosch dishwashers: Welded relay contacts, leakage current to ground on heating element (> 10 mA), or faulty voltage sensing resistors on PCB.
Measure heating element insulation resistance to ground (must be > 20 MΩ with 500V megohmmeter). Inspect PCB for burnt traces or replace power board. Hold Start/Reset key for 3 seconds until '0:01' appears, close door, allow 60s for drain completion, then power off.



