Bosch E31 — Dishwasher
[ACTIVE]Bosch Serie 4 / Serie 6 / Serie 8 ActiveWater & PerfectDry Zeolith: Zeolith heat pump overheating safety trip E31; thermal cutout on drying container activated.
On Bosch dishwashers: Blocked drying air inlet or exhaust inside tub, fan blower failed during regeneration, or water entered zeolite container.
Check drying air outlet cap in right rear corner of tub for obstructions. Measure Zeolith heater resistance (nominal ~35–45 Ω). Check thermal fuse continuity. Hold Start/Reset key for 3 seconds until '0:01' appears, close door, allow 60s for drain completion, then power off.



