OEM VERIFIED BENCH

OFFICIAL FAULT CODEE55

Bosch // OFFICIAL DIAGNOSTIC BENCH

Bosch E55

DryerDrive Motor, Inverter & Tachometer Sensor

Dryer

Other Brands Sharing Code E55:SiemensE55 NeffE55 GaggenauE55

Symptom / Description

FAULT

Bosch Serie 6 / Serie 8 / HomeProfessional AutoClean SelfCleaning Condenser: Compressor rotor locked / stalled E55; heat pump compressor fails to turn over, inverter trips on locked-rotor current.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

On Bosch tumble dryers: Mechanical seizure of rotary compression scroll, high head pressure due to blocked heat exchanger, or liquid slugging.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

1Allow system pressures to equalize for 1 hour. Clean all heat exchanger fins thoroughly. If compressor remains seized, sealed refrigeration repair is required. Turn cycle selector to 6 o'clock, press and hold Start/Pause, rotate selector to 7 o'clock, release button, return to Off.

AI diagnostic workshop engine analyzing appliance circuit schematics and error telemetry in real time

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide Bosch Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLDrive Motor, Inverter & Tachometer SensorTumble Dryer

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

Precision digital multimeter probes measuring electrical resistance in Ohms on an appliance control board

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:3-Phase Motor Windings / Tacho Generator / Carbon Brushes

Test Pins & Connections

PROBE (+)

PROBE (-)

Across phase pins U-V, V-W, U-W on motor harness; across tacho pins

Tolerance & Diagnostic CriteriaBLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho.

1. Pre-Intervention Electrical Safety Protocols

!High-Voltage Safety Protocol & DC Bus: Wait at least 5 minutes after power cutoff to allow inverter DC bus capacitors (380V DC) to bleed down.
!Verify 0V DC across inverter filter capacitors before unplugging motor harness connectors.
!Keep hands clear of drive belt and pulleys during any manual rotation tng.

3. Preliminary Mechanical & Visual Checks

Slip off drive belt and spin drum/motor shaft by hand to check for roaring or seized ball bearings.
For universal motors: verify carbon brushes have at least 10mm remaining length and smooth contact faces.
Inspect motor suspension rubber mounts and drive belt tension/groove profile.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: Bosch E55

FAQ TREE

What does error code E55 mean on a Bosch appliance?

Bosch error code E55 indicates: Bosch Serie 6 / Serie 8 / HomeProfessional AutoClean SelfCleaning Condenser: Compressor rotor locked / stalled E55; heat pump compressor fails to turn over, inverter trips on locked-rotor current..

What is the root cause of Bosch error code E55?

The primary root cause for Bosch code E55 is: On Bosch tumble dryers: Mechanical seizure of rotary compression scroll, high head pressure due to blocked heat exchanger, or liquid slugging..

How do I fix or resolve Bosch error code E55?

To resolve error code E55: Allow system pressures to equalize for 1 hour. Clean all heat exchanger fins thoroughly. If compressor remains seized, sealed refrigeration repair is required. Turn cycle selector to 6 o'clock, press and hold Start/Pause, rotate selector to 7 o'clock, release button, return to Off.

Is it safe to clear Bosch error code E55 by resetting power?

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Bosch code E55 persists, the physical component causing On Bosch tumble dryers: Mechanical seizure of rotary compression scroll, high head pressure due to blocked heat exchanger, or liquid slugging. must be inspected or replaced.

How do I test electrical resistance for Bosch code E55 using a multimeter?

Set a digital multimeter to ohms (Ω). Disconnect power and test 3-Phase Motor Windings / Tacho Generator / Carbon Brushes across Across phase pins U-V, V-W, U-W on motor harness; across tacho pins. Expected nominal reading is 3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator). Tolerance: BLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho..

What safety protocol must be followed before servicing Bosch code E55?

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.

Community Verification

COMMUNITY

Did this solution resolve the issue?

Back to Search

OEM VERIFIED BENCH

OFFICIAL FAULT CODEE55

Bosch // OFFICIAL DIAGNOSTIC BENCH

Bosch E55

DryerDrive Motor, Inverter & Tachometer Sensor

Dryer

Other Brands Sharing Code E55:SiemensE55 NeffE55 GaggenauE55

Symptom / Description

FAULT

Bosch Serie 6 / Serie 8 / HomeProfessional AutoClean SelfCleaning Condenser: Compressor rotor locked / stalled E55; heat pump compressor fails to turn over, inverter trips on locked-rotor current.

TELEMETRY // LIVESIG: FAULT_DETECTED

Root Cause

ROOT CAUSE

On Bosch tumble dryers: Mechanical seizure of rotary compression scroll, high head pressure due to blocked heat exchanger, or liquid slugging.

CIRCUIT // SUBSYSTEMLOGIC: ROOT_ISOLATED

Repair Instructions

UNLOCKED

AI WORKSHOP PROTOCOL ENGINE

Direct extraction from OEM factory manuals & wiring schematics

Field Actions

DISPATCH

Need Help? Call a Certified Technician Worldwide Bosch Parts Finder

Electrical & Safety Protocol

Always disconnect appliance from 230V/400V mains before opening panels. Use CAT III multimeter for circuit testing.

CALIBRATED BENCH PROTOCOL // CAT III 600V

Workshop Verification & Safety Checklist

WORKSHOP VERIFICATION PROTOCOLDrive Motor, Inverter & Tachometer SensorTumble Dryer

2. Multimeter & Electrical Bench Tests (Ω)

MODE: OHMMETER (Ω)AUTO-RANGE

CALIBRATED METROLOGY RESISTANCE BENCH (CAT III)

Nominal Resistance (Ω)

3Ω–6Ω (BLDC phase U-V-W) / 60Ω–180Ω (Tacho coil) / 1.5Ω–3.5Ω (Universal stator)NOMINAL

0 Ω (SHORT)CALIBRATED BAND∞ OL (OPEN)

▲ NOMINAL OPERATING WINDOW

Target Component:3-Phase Motor Windings / Tacho Generator / Carbon Brushes

Test Pins & Connections

PROBE (+)

PROBE (-)

Across phase pins U-V, V-W, U-W on motor harness; across tacho pins

Tolerance & Diagnostic CriteriaBLDC phase winding values must be strictly balanced within ±0.3Ω. Hand rotation generates 1V–4V AC on tacho.

1. Pre-Intervention Electrical Safety Protocols

!High-Voltage Safety Protocol & DC Bus: Wait at least 5 minutes after power cutoff to allow inverter DC bus capacitors (380V DC) to bleed down.
!Verify 0V DC across inverter filter capacitors before unplugging motor harness connectors.
!Keep hands clear of drive belt and pulleys during any manual rotation tng.

3. Preliminary Mechanical & Visual Checks

Slip off drive belt and spin drum/motor shaft by hand to check for roaring or seized ball bearings.
For universal motors: verify carbon brushes have at least 10mm remaining length and smooth contact faces.
Inspect motor suspension rubber mounts and drive belt tension/groove profile.

Perform these diagnostic steps before triggering AI Deep Search or replacing boards.Certified Workshop Routine

Frequently Asked Questions: Bosch E55

FAQ TREE

What does error code E55 mean on a Bosch appliance?

What is the root cause of Bosch error code E55?

The primary root cause for Bosch code E55 is: On Bosch tumble dryers: Mechanical seizure of rotary compression scroll, high head pressure due to blocked heat exchanger, or liquid slugging..

How do I fix or resolve Bosch error code E55?

Is it safe to clear Bosch error code E55 by resetting power?

How do I test electrical resistance for Bosch code E55 using a multimeter?

What safety protocol must be followed before servicing Bosch code E55?

Community Verification

COMMUNITY

Did this solution resolve the issue?

Bosch E55

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: Bosch E55

Community Verification

Related Bosch Tumble Dryer Error Codes

Bosch E55

Symptom / Description

Root Cause

Repair Instructions

Field Actions

Workshop Verification & Safety Checklist

Frequently Asked Questions: Bosch E55

Community Verification

Related Bosch Tumble Dryer Error Codes