Rosieres Error Codes & Diagnostics
Complete B2B dictionary of fault codes, troubleshooting steps, and repair manuals for Rosieres home appliances, including Washing Machines, Dishwashers, Ovens, Dryers, and Refrigerators.
40 Verified Codes in Database
Are you a Certified Technician?Stamp unverified codes below to earn +10 Reputation Points.
(Only available for users logged in with a Google account)
(Only available for users logged in with a Google account)
| Code | Fault / Diagnostics | Appliances | Action |
|---|---|---|---|
| AL01 | Refrigerator Compartment Sensor Fault Info: The temperature sensor (NTC) for the fresh food compartment is faulty (open or short circuit). | Refrigerator | |
| AL02 | Evaporator Sensor Fault Info: The sensor attached to the evaporator coil (part of the cooling system) is faulty. | Refrigerator | |
| AL03 | Freezer Compartment Sensor Fault Info: The temperature sensor (NTC) for the freezer compartment is faulty. | Refrigerator | |
| E01 | Door Lock Fault Info: The door lock mechanism is faulty, the wiring to the lock is damaged, or the main control board (PCB) is not sending power to the lock. | Washing Machine | |
| E1 | Anti-Flood Device Activated Info: Water has leaked into the base tray of the dishwasher, activating the flood protection switch. | Dishwasher | |
| E02 | Water Fill Timeout Info: The machine is not filling with water within the expected time. This could be due to a closed water tap, a kinked inlet hose, a blocked filter in the inlet valve, or a faulty water inlet valve. | Washing Machine | |
| E2 | Touch Control Panel Fault Info: A button is detected as being permanently pressed. This is often caused by liquid, food debris, or an object sitting on the control panel. | Hob | |
| E03 | Drain Timeout Info: The machine is not draining water correctly. The drain pump filter is blocked, the drain pump is faulty, or the drain hose is blocked or kinked. | Washing Machine | |
| E3 | Water Not Heating Info: The water is not reaching the target temperature in the allotted time. The heating element, NTC sensor, or main board relay could be faulty. | Dishwasher | |
| E04 | Anti-Flood Activated / Overfill Info: Too much water has entered the drum, or a leak has been detected in the base. This is often caused by a faulty pressure switch or a stuck water inlet valve. | Washing Machine | |
| E4 | Overfill Detected Info: The dishwasher has filled with too much water. The pressure sensor is faulty or the water inlet valve is stuck open. | Dishwasher | |
| E05 | NTC Temperature Sensor Fault Info: The water temperature sensor (NTC) is providing an incorrect reading, is open circuit, or short-circuited. This could be the sensor itself or the wiring to it. | Washing Machine | |
| E5 | Temperature Sensor (NTC) Fault Info: The NTC sensor is giving an out-of-range reading (open or short circuit). 5 Elite Techs Verified | Dishwasher | |
| E06 | Control Board Fault or Unbalanced Load Info: This error can indicate a fault on the main control board (PCB) or a severely unbalanced load that the machine cannot correct. | Washing Machine | |
| E6 | Main Board (PCB) Fault Info: The main electronic control module has detected an internal error. | Dishwasher | |
| E07 | Motor Fault / Jammed Motor Info: The motor is jammed, or the motor's tacho sensor is faulty, preventing the motor from turning correctly. | Washing Machine | |
| E7 | Circulation Pump / Wash Motor Fault Info: The main wash motor (circulation pump) is blocked, has failed, or its capacitor has failed. | Dishwasher | |
| E08 | Motor Speed Sensor Fault Info: The motor's speed sensor (tacho) is not sending a correct signal to the control board. This could be a faulty sensor, loose magnet, or bad wiring. | Washing Machine | |
| E8 | Drain Timeout Info: Water is not being pumped out of the dishwasher. The filters are blocked, the drain hose is kinked, or the drain pump has failed. | Dishwasher | |
| E09 | Motor Triac Fault Info: The electronic component (triac) that controls the motor on the main PCB has failed (short circuit). | Washing Machine | |
| Err09 | Configuration Error (EEPROM) Info: The oven's main board memory (EEPROM) is corrupt or not configured for the specific oven model. | Oven | |
| E10 | Drum Sensor or Selector Fault Info: On some models, this indicates a fault with the drum sensor or the program selector switch. | Washing Machine | |
| E11 | Dryer Sensor Open Circuit Info: On a washer-dryer, the drying sensor is faulty or its wiring is disconnected. | Washer Dryer | |
| E12 | PCB Communication Error Info: There is a communication failure between the main control board and the display board. | Washer Dryer | |
| E13 | Main Control Board Fault Info: The main control board (PCB) has a general failure. | Washer Dryer | |
| E14 | Water Heating Fault Info: The machine is unable to heat the water. This can be a faulty heating element, a faulty NTC sensor, or a fault on the main PCB. | Washer Dryer | |
| E15 | PCB Memory/Programming Fault Info: The control board's memory chip is corrupt or the board has not been programmed correctly for the specific appliance model. | Washing Machine | |
| E16 | Heating Element Short Circuit Info: The insulation on the heating element has failed, causing a short circuit. This will often trip the household circuit breaker. | Washing Machine | |
| E17 | Motor Tacho Signal Incorrect Info: The signal being generated by the motor's speed sensor is out of the expected range or unstable. | Washing Machine | |
| E18 | Incorrect PCB Configuration Info: The main control board (PCB) installed is not the correct one for the appliance model, or its configuration data is wrong. | Washing Machine |