Candy Er07

Candy error code ER07 indicates: Candy Pop / Smart / Moderna / Timeless Pyrolytic Oven: Food meat probe circuit fault Er07; internal core thermometer probe reads short-circuited or out-of-scale temperature..

The primary root cause for Candy code ER07 is: On Candy ovens featuring Timeless & Moderna precision convection thermal management, tangential cooling ventilation, and GIAS electronic programmer: Liquid grease ingress inside meat probe jack socket on cavity wall, punctured probe silicone cord, or shorted connector..

To resolve error code ER07: Unplug meat probe from wall jack. Clean socket contact pins with isopropyl alcohol. Measure probe resistance with multimeter (~10 kΩ or ~1000 Ω depending on type). Turn programmer knob to Off, disconnect mains power at the isolation breaker for 60 seconds, restore power and set the electronic timer clock.

Resetting power (unplugging for 5–10 minutes) clears temporary memory errors. However, if Candy code ER07 persists, the physical component causing On Candy ovens featuring Timeless & Moderna precision convection thermal management, tangential cooling ventilation, and GIAS electronic programmer: Liquid grease ingress inside meat probe jack socket on cavity wall, punctured probe silicone cord, or shorted connector. must be inspected or replaced.

Set a digital multimeter to ohms (Ω). Disconnect power and test NTC Temperature Sensor Probe (Thermistor) across Across sensor pins 1-2 (unplugged harness). Expected nominal reading is 4.8kΩ–12kΩ (at 20°C–25°C). Tolerance: Negative temperature coefficient: resistance drops smoothly when warmed with fingers. OL = open circuit..

Standard electrical safety protocol: 1. Disconnect 230V mains power before opening panels. 2. Verify zero voltage at test points. 3. Allow hot water or heating elements to cool below 30°C before handling.