Access our premium database of error codes, common faults, and professional repair solutions for Miele appliances.
The device displays a system error at startup or suddenly stops mid-cycle for no apparent reason.
An inconsistency has been detected between the backup memory and the working memory of the...
1. Unplug the device from the mains for 15 minutes to force a full reset. 2. Reconnect and...
The device displays a system error at startup or suddenly stops mid-cycle for no apparent reason.
An inconsistency has been detected between the backup memory and the working memory of the...
1. Unplug the device from the mains for 15 minutes to force a full reset. 2. Reconnect and...
The program starts, but the washing machine drum does not spin. The device may shut down after one or more unsuccessful attempts.
The engine is not commanded to turn or is unable to do so. Causes include a broken belt,...
1. Turn off the power. 2. Check that the drum can be rotated manually. 3. Inspect the...
The program starts, but the washing machine drum does not spin. The device may shut down after one or more unsuccessful attempts.
The engine is not commanded to turn or is unable to do so. Causes include a broken belt,...
1. Turn off the power. 2. Check that the drum can be rotated manually. 3. Inspect the...
The device stops during the cycle and displays a communication error, often before the spinning phases.
Communication between the main control module (ELP 230) and the motor frequency converter...
1. Unplug the appliance. 2. Check the physical connection and condition of the...
The device stops during the cycle and displays a communication error, often before the spinning phases.
Communication between the main control module (ELP 230) and the motor frequency converter...
1. Unplug the appliance. 2. Check the physical connection and condition of the...
The motor runs erratically, at an inappropriate speed, or the cycle stops abruptly with a motor error.
The tachogenerator signal, which measures engine speed, is missing or incorrect. The...
1. Turn off the machine. 2. Access the engine and check the tachometer connection. 3....
The motor runs erratically, at an inappropriate speed, or the cycle stops abruptly with a motor error.
The tachogenerator signal, which measures engine speed, is missing or incorrect. The...
1. Turn off the machine. 2. Access the engine and check the tachometer connection. 3....
The program stops shortly after starting a rotation phase, because no drum rotation is detected.
After commanding the engine to turn, the electronic card did not receive any signal from...
1. Unplug the appliance. 2. Make sure the drive belt is in place and tight. 3. Check the...
The program stops shortly after starting a rotation phase, because no drum rotation is detected.
After commanding the engine to turn, the electronic card did not receive any signal from...
1. Unplug the appliance. 2. Make sure the drive belt is in place and tight. 3. Check the...
The device displays a rotation error even though the program is paused or the motor should be stopped.
The control board receives a tachometer rotation signal while the engine is supposed to be...
1. Perform a reset by unplugging the device. 2. Inspect the tachometer wiring for damage to...
The device displays a rotation error even though the program is paused or the motor should be stopped.
The control board receives a tachometer rotation signal while the engine is supposed to be...
1. Perform a reset by unplugging the device. 2. Inspect the tachometer wiring for damage to...
A motor-related error code appears at the end of the program, after all rotation has ceased.
The electronics detect a phantom rotation signal after the end of the cycle. The cause is...
1. Unplug then plug in the device to reset. 2. Check that the machine is properly grounded....
A motor-related error code appears at the end of the program, after all rotation has ceased.
The electronics detect a phantom rotation signal after the end of the cycle. The cause is...
1. Unplug then plug in the device to reset. 2. Check that the machine is properly grounded....
The motor does not stop at the end of the cycle or the appliance trips when starting a program.
The contactor (power relay) of the frequency converter (FU) has stuck in the closed...
1. Unplug the appliance immediately for safety reasons. 2. Locate the frequency converter...
The motor does not stop at the end of the cycle or the appliance trips when starting a program.
The contactor (power relay) of the frequency converter (FU) has stuck in the closed...
1. Unplug the appliance immediately for safety reasons. 2. Locate the frequency converter...
The appliance stops mid-cycle, particularly during demanding phases like spinning, and refuses to restart immediately.
The motor thermal protector (Klixon) has tripped due to overheating. This can be caused by...
1. Allow the appliance to cool for at least 30 minutes. 2. Check that the laundry load is...
The appliance stops mid-cycle, particularly during demanding phases like spinning, and refuses to restart immediately.
The motor thermal protector (Klixon) has tripped due to overheating. This can be caused by...
1. Allow the appliance to cool for at least 30 minutes. 2. Check that the laundry load is...
On a top loading washing machine, the program refuses to start, indicating a drum positioning problem.
The automatic positioning system failed to lock the drum with the gates up.
1. Open the lid and turn the drum manually until you hear the door lock click. 2. Inspect...
On a top loading washing machine, the program refuses to start, indicating a drum positioning problem.
The automatic positioning system failed to lock the drum with the gates up.
1. Open the lid and turn the drum manually until you hear the door lock click. 2. Inspect...
On a top washing machine, the drum remains stationary and the program does not start, displaying a position error.
The system detects the drum as being locked in the up position when it should be free to...
1. Turn off the power and try to rotate the drum by hand to check if it is really stuck. 2....
On a top washing machine, the drum remains stationary and the program does not start, displaying a position error.
The system detects the drum as being locked in the up position when it should be free to...
1. Turn off the power and try to rotate the drum by hand to check if it is really stuck. 2....
The spin phase is very short, does not reach maximum speed, or is completely canceled. The laundry comes out very damp.
The system has detected an unevenly distributed load of laundry (unbalanced), which could...
1. Open the door and redistribute the laundry more evenly in the drum. 2. Avoid washing a...
The spin phase is very short, does not reach maximum speed, or is completely canceled. The laundry comes out very damp.
The system has detected an unevenly distributed load of laundry (unbalanced), which could...
1. Open the door and redistribute the laundry more evenly in the drum. 2. Avoid washing a...
The spin is consistently interrupted or does not work properly, even with well-balanced loads.
The physical unbalance detection sensor or switch is defective. It sends incorrect...
1. Unplug the appliance. 2. Locate the unbalance switch, usually attached to the tank or...
The spin is consistently interrupted or does not work properly, even with well-balanced loads.
The physical unbalance detection sensor or switch is defective. It sends incorrect...
1. Unplug the appliance. 2. Locate the unbalance switch, usually attached to the tank or...
The program lasts much longer than expected, the water does not heat up at all, or on the contrary, it overheats.
The NTC1 temperature sensor, which measures the water temperature, is faulty. It is either...
1. Turn off the power. 2. Locate the NTC probe on the heating element or bowl. 3....
The program lasts much longer than expected, the water does not heat up at all, or on the contrary, it overheats.
The NTC1 temperature sensor, which measures the water temperature, is faulty. It is either...
1. Turn off the power. 2. Locate the NTC probe on the heating element or bowl. 3....
The specific disinfection program fails or fails to reach the required high temperature.
The heating system has a problem specifically at high temperatures. The NTC1 probe may be...
1. Follow the diagnostic procedure for error F4136, testing the NTC probe. 2. Inspect the...
The specific disinfection program fails or fails to reach the required high temperature.
The heating system has a problem specifically at high temperatures. The NTC1 probe may be...
1. Follow the diagnostic procedure for error F4136, testing the NTC probe. 2. Inspect the...
Our official certified partners service Miele appliances in your area.