Access our premium database of error codes, common faults, and professional repair solutions for Miele appliances.
The device reports an excessive water level or stops mid-cycle with an overflow alert.
The analog pressure sensor has detected a water level that is too high, indicating a risk...
1. Turn off the device. 2. Check the compression chamber and pressure switch hose for...
The device reports an excessive water level or stops mid-cycle with an overflow alert.
The analog pressure sensor has detected a water level that is too high, indicating a risk...
1. Turn off the device. 2. Check the compression chamber and pressure switch hose for...
Water does not drain from the tank at the end of the cycle or the appliance stops with stagnant water.
The drain system is clogged or the drain pump is defective, preventing proper drainage of...
1. Unplug the appliance. 2. Access the drain pump filter and clean it of any debris. 3....
Water does not drain from the tank at the end of the cycle or the appliance stops with stagnant water.
The drain system is clogged or the drain pump is defective, preventing proper drainage of...
1. Unplug the appliance. 2. Access the drain pump filter and clean it of any debris. 3....
The device interrupts the spinning phase and displays a drain error; the laundry remains excessively damp.
A drain problem specifically manifests itself before or during the spin cycle, often due to...
1. Turn off the machine. 2. Perform a complete check of the drain circuit, including the...
The device interrupts the spinning phase and displays a drain error; the laundry remains excessively damp.
A drain problem specifically manifests itself before or during the spin cycle, often due to...
1. Turn off the machine. 2. Perform a complete check of the drain circuit, including the...
The appliance (probably a gas dryer) does not heat or its cycle stops prematurely.
The ignition safety device has detected an anomaly, indicating a problem with the gas...
1. Turn off the power supply and gas supply. 2. Inspect fuse F10 on the electronic module...
The appliance (probably a gas dryer) does not heat or its cycle stops prematurely.
The ignition safety device has detected an anomaly, indicating a problem with the gas...
1. Turn off the power supply and gas supply. 2. Inspect fuse F10 on the electronic module...
The device interrupts the program, indicating that a safe water level has been reached.
Level pressure switch 2B1/13 has activated its contact 1-3, signaling a water level too...
1. Disconnect the power supply. 2. Visually check the water level in the tank. 3. If the...
The device interrupts the program, indicating that a safe water level has been reached.
Level pressure switch 2B1/13 has activated its contact 1-3, signaling a water level too...
1. Disconnect the power supply. 2. Visually check the water level in the tank. 3. If the...
The program is interrupted because the device detects an inconsistent water level signal.
Level pressure switch 1B1/13 has closed its contact 1-2, indicating that the normal wash...
1. Turn off the device. 2. Inspect the 1B1/13 pressure switch and its tube for obstruction...
The program is interrupted because the device detects an inconsistent water level signal.
Level pressure switch 1B1/13 has closed its contact 1-2, indicating that the normal wash...
1. Turn off the device. 2. Inspect the 1B1/13 pressure switch and its tube for obstruction...
The device displays a fault related to the automatic dosing system and does not draw up detergent correctly.
An abnormality has been detected in the dosing system, which may be caused by a blocked...
1. Check that the detergent cartridges are correctly inserted and not empty. 2. Start a...
The device displays a fault related to the automatic dosing system and does not draw up detergent correctly.
An abnormality has been detected in the dosing system, which may be caused by a blocked...
1. Check that the detergent cartridges are correctly inserted and not empty. 2. Start a...
The automatic detergent dosing system does not work and an error is reported during the sampling phase.
On older models, the pressure switch detects an absence of water. On recent models, a...
1. For older models: check the water inlet and pressure switch B1/1. 2. For recent models:...
The automatic detergent dosing system does not work and an error is reported during the sampling phase.
On older models, the pressure switch detects an absence of water. On recent models, a...
1. For older models: check the water inlet and pressure switch B1/1. 2. For recent models:...
A maintenance message displays, indicating that lubrication of the drum bearings is required.
The operating hours counter programmed for preventive maintenance of the bearings has...
1. Schedule a maintenance intervention. 2. Lubricate the bearings using the grease...
A maintenance message displays, indicating that lubrication of the drum bearings is required.
The operating hours counter programmed for preventive maintenance of the bearings has...
1. Schedule a maintenance intervention. 2. Lubricate the bearings using the grease...
The device displays a notification or error code indicating that general maintenance is required.
The internal counter, based on operating hours or cycles, signals when the periodic service...
1. Have a complete service carried out by an authorized technician. 2. Maintenance includes...
The device displays a notification or error code indicating that general maintenance is required.
The internal counter, based on operating hours or cycles, signals when the periodic service...
1. Have a complete service carried out by an authorized technician. 2. Maintenance includes...
A specific maintenance message is displayed, requiring a regulatory safety inspection (BGR type).
The time interval for the mandatory safety inspection (relevant standard for commercial...
1. Arrange for an inspection by a qualified technician for BGR safety checks. 2. The...
A specific maintenance message is displayed, requiring a regulatory safety inspection (BGR type).
The time interval for the mandatory safety inspection (relevant standard for commercial...
1. Arrange for an inspection by a qualified technician for BGR safety checks. 2. The...
The device does not correctly detect the water level, causing filling or emptying errors.
The analog pressure sensor, which is integrated into the ELP 230 electronic power card, has...
1. Turn off the power. 2. Locate the ELP 230 electronic power board. 3. Diagnostics...
The device does not correctly detect the water level, causing filling or emptying errors.
The analog pressure sensor, which is integrated into the ELP 230 electronic power card, has...
1. Turn off the power. 2. Locate the ELP 230 electronic power board. 3. Diagnostics...
The device does not start or suddenly stops, displaying a communication error between electronic modules.
Communication breakdown between the control module (EB 230) and the power board (ELP 230),...
1. Unplug the device from the mains. 2. Access the electronic modules. 3. Disconnect and...
The device does not start or suddenly stops, displaying a communication error between electronic modules.
Communication breakdown between the control module (EB 230) and the power board (ELP 230),...
1. Unplug the device from the mains. 2. Access the electronic modules. 3. Disconnect and...
The device displays an error during the initial phase of the program and does not adjust the water quantity or cycle duration.
The laundry load weighing system has encountered an error, possibly due to the pressure...
1. Turn off and restart the device to reset the system. 2. Check that the laundry load is...
The device displays an error during the initial phase of the program and does not adjust the water quantity or cycle duration.
The laundry load weighing system has encountered an error, possibly due to the pressure...
1. Turn off and restart the device to reset the system. 2. Check that the laundry load is...
The program has been interrupted and the device reports a power outage, even though no power outage has been observed.
The device has detected a power outage or fluctuation in the supply voltage. It could also...
1. Check the wall outlet and power cord for a stable connection. 2. Make sure the...
The program has been interrupted and the device reports a power outage, even though no power outage has been observed.
The device has detected a power outage or fluctuation in the supply voltage. It could also...
1. Check the wall outlet and power cord for a stable connection. 2. Make sure the...
Our official certified partners service Miele appliances in your area.