Access our premium database of error codes, common faults, and professional repair solutions for Miele appliances.
Cooking from the bottom is ineffective or excessive, as the oven is unable to regulate the heat of the base correctly.
The PT1000 temperature probe dedicated to monitoring the lower heating element is...
Turn off the power. Access the bottom heating element to locate the associated temperature...
Miele F194: Operational cycle fault detected during Built-in Oven program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The bottom heat is weak or non-existent, resulting in uneven cooking of dishes (undercooked bottom).
The circuit of the PT1000 temperature probe of the bottom heating element is cut,...
Disconnect the power supply to the device. Locate the PT1000 probe on the lower heating...
Miele F195: Operational cycle fault detected during Built-in Oven program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The wireless cooking probe does not transmit temperature information to the oven, making this feature unusable.
A communication error has occurred between the wireless cooking probe and the oven receiver...
Verify that the wireless probe is properly charged. Try to re-pair the probe with the oven...
Miele F196: Operational cycle fault detected during Dishwasher program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The appliance (steam oven or dishwasher) stops during the cycle and reports an anomaly linked to the water level in the tank.
The water level sensor in the drain pump housing detects an incorrect level, possibly due...
Turn off the power. Access the pump housing and drain filter, clean them of any debris....
The device displays error code F197, which is not listed in the user manual.
This error code is for Miele technical service use only and indicates a specific failure...
Perform an electrical reset by turning off power to the device at the circuit breaker for...
An F198 code appears on the device's screen, preventing it from functioning normally.
This is an internal manufacturer diagnostic code, reporting a specific hardware or software...
Try to resolve the problem by resetting the device (prolonged power outage). If the error...
The operation of the device is interrupted by the display of error code F199.
This error code indicates a specific internal fault, typically used by Miele engineers for...
The first step is to restart the device by cutting off its power supply for several...
Miele F200: Operational cycle fault detected during Refrigerator / Freezer program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The cooling system (e.g. milk cooler) no longer produces cold or works non-stop.
The NTC temperature probe positioned on the cold side of the Peltier cooling module is...
Unplug the device from its power source. Access the Peltier module and identify the NTC...
Miele F201: Operational cycle fault detected during Refrigerator / Freezer program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
Cooling is completely inactive because the device does not receive any temperature information from the refrigeration system.
The NTC temperature probe circuit on the cold side of the Peltier module is open...
Turn off the power. Locate the Peltier module and its cold side NTC probe. Inspect its...
Miele F202: Operational cycle fault detected during Refrigerator / Freezer program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
Cooling is poor and the heat extraction fan operates abnormally (continuously or never).
The NTC temperature probe located on the hot side (sink) of the Peltier module is...
Turn off the power supply. Access the Peltier module heat sink. Test the NTC probe attached...
Miele F203: Operational cycle fault detected during Refrigerator / Freezer program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The device no longer cools efficiently and can go into safety mode to avoid undetected overheating.
The NTC temperature probe circuit on the hot side of the Peltier module is interrupted,...
Unplug the device. Examine the NTC probe on the Peltier module heat sink and its wiring....
Miele F204: Operational cycle fault detected during Refrigerator / Freezer program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The milk cooler of the coffee machine does not work, the milk remains at room temperature.
The Peltier cooling module has failed or its performance has become insufficient. It no...
Turn off the power. Make sure the ventilation grilles are clean. Check that the supply...
Miele F205: Operational cycle fault detected during Refrigerator / Freezer program execution.
Operational sensor variance, wiring connector discontinuity, or component parameter...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
The cooling system shuts down prematurely and reports overheating. The ventilation area is abnormally hot.
The Peltier module overheats, usually because the ventilation slots are blocked, the fan is...
Unplug the appliance. Dust and clean all ventilation grilles. Make sure the device has...
The device has stopped and displays error code F206, which is not described in the instructions.
This code indicates a specific internal fault that must be diagnosed by Miele trained...
The only action to attempt is a reset by turning off the power for 15 minutes. If the error...
An F207 code is displayed, rendering the device unusable.
This is an internal manufacturer trouble code, not intended for end user diagnosis.
Perform a complete power cycle (unplug, wait 10 minutes, plug back in). If the error code...
Operation is blocked by the appearance of error code F208.
This error code corresponds to a specific hardware or software fault identified by the...
Try a reset by turning off power at the circuit breaker. If the problem is not resolved,...
The device is faulty and displays code F209, not documented for the user.
This service code reports a specific technical fault that requires advanced diagnostic...
Restart the device by turning off the power for an extended period of time. If error F209...
The device signals an overflow and stops operation, indicating a water leak in its base.
The anti-leak safety system (Waterproof System) was activated by the float located in the...
Disconnect the device from the power supply. Carefully tilt it forward to drain the water...
The cycle is interrupted prematurely with a filling fault, or the device does not take in enough water.
The flow meter, which measures the quantity of water admitted, is blocked, defective or its...
Close the water inlet tap and unplug the appliance. Check the inlet hose for kinks or...
Water intake fault / Waterproof system activated
Machine has taken on too little water or a leak has been detected, activating the safety...
Check water supply tap is fully open. Check for leaks around the machine. If the problem...
The Miele mobile app cannot communicate with the device, displaying a network connection failure message.
The device's built-in Wi-Fi module has lost connection with the home network, the router is...
Verify that your Wi-Fi router is operational and the signal is strong enough at the...
Our official certified partners service Miele appliances in your area.