Access our premium database of error codes, common faults, and professional repair solutions for Miele appliances.
The device displays F4228 and goes into security mode, preventing its use.
The control board's main processor has detected a critical internal error that cannot be...
Disconnect the device from the power supply for 30 minutes. Plug it back in and try running...
The device displays F4228 and goes into security mode, preventing its use.
The control board's main processor has detected a critical internal error that cannot be...
Disconnect the device from the power supply for 30 minutes. Plug it back in and try running...
The cycle is interrupted unexpectedly with code F4229 on the display.
Internal error in the power module, possibly linked to overheating or failure of a...
Leave the appliance unplugged for one hour to cool completely. Reconnect and test. If fault...
The cycle is interrupted unexpectedly with code F4229 on the display.
Internal error in the power module, possibly linked to overheating or failure of a...
Leave the appliance unplugged for one hour to cool completely. Reconnect and test. If fault...
The device is unusable and continuously reports fault F4230.
Generalized failure of the main control board, making any operation impossible.
Turn off power at the circuit breaker for 10 minutes to attempt a reset. If this does not...
The device is unusable and continuously reports fault F4230.
Generalized failure of the main control board, making any operation impossible.
Turn off power at the circuit breaker for 10 minutes to attempt a reset. If this does not...
Code F4231 displays at startup or mid-cycle, shutting down the unit.
An internal logic error was detected by the control system, indicating a malfunction of the...
Perform an electrical reset by unplugging the unit for 20 minutes. Reconnect. If the F4231...
Code F4231 displays at startup or mid-cycle, shutting down the unit.
An internal logic error was detected by the control system, indicating a malfunction of the...
Perform an electrical reset by unplugging the unit for 20 minutes. Reconnect. If the F4231...
The device turns off and restarts with error F4232.
Internal stability problem of the control module, potentially due to micro-cuts on the card.
Check the stability of your electrical installation. Unplug the device for 30 minutes. If...
The device turns off and restarts with error F4232.
Internal stability problem of the control module, potentially due to micro-cuts on the card.
Check the stability of your electrical installation. Unplug the device for 30 minutes. If...
The code F4233 is visible on the screen and the device does not start any programs.
The electronic module detected an irreversible internal anomaly during its self-check.
Unplug the device and wait around ten minutes. Plug it back in. If error F4233 is still...
The code F4233 is visible on the screen and the device does not start any programs.
The electronic module detected an irreversible internal anomaly during its self-check.
Unplug the device and wait around ten minutes. Plug it back in. If error F4233 is still...
The device stops randomly and displays fault F4234.
Internal conflict in power board software or corruption of calibration data.
Attempt a reset by turning off the power to the wall outlet for at least 15 minutes. If the...
The device stops randomly and displays fault F4234.
Internal conflict in power board software or corruption of calibration data.
Attempt a reset by turning off the power to the wall outlet for at least 15 minutes. If the...
Error code F4235 appears, preventing interaction with the device.
The control system has recorded a critical failure of one of its internal circuits.
Perform an extended power outage (30 minutes) to reset the system. If the F4235 error...
Error code F4235 appears, preventing interaction with the device.
The control system has recorded a critical failure of one of its internal circuits.
Perform an extended power outage (30 minutes) to reset the system. If the F4235 error...
The device beeps and displays F4236, interrupting the current cycle.
Communication or synchronization error between the different microcontrollers of the main...
Unplug the device from the mains. Wait 20 minutes. Reconnect and run a test. If the anomaly...
The device beeps and displays F4236, interrupting the current cycle.
Communication or synchronization error between the different microcontrollers of the main...
Unplug the device from the mains. Wait 20 minutes. Reconnect and run a test. If the anomaly...
Fault code F4237 is displayed, and the device is completely blocked.
Failure of a critical component on the power board, making operation impossible.
Perform an electrical reset by unplugging for 10 minutes. If the problem is not resolved...
Fault code F4237 is displayed, and the device is completely blocked.
Failure of a critical component on the power board, making operation impossible.
Perform an electrical reset by unplugging for 10 minutes. If the problem is not resolved...
The device does not complete its cycle and reports a system anomaly F4238.
The device firmware has detected an unlisted internal error condition.
Isolate the device from the electrical network for half an hour. Reconnect it. If fault...
The device does not complete its cycle and reports a system anomaly F4238.
The device firmware has detected an unlisted internal error condition.
Isolate the device from the electrical network for half an hour. Reconnect it. If fault...
Displaying code F4239, the device pauses and cannot be restarted.
Serious internal error in power management or control circuits on the main board.
Attempt a complete restart by turning off the power via the circuit breaker for 15 minutes....
Displaying code F4239, the device pauses and cannot be restarted.
Serious internal error in power management or control circuits on the main board.
Attempt a complete restart by turning off the power via the circuit breaker for 15 minutes....
The program hangs and error code F4240 is indicated on the control panel.
Software or hardware malfunction within the main electronic control module.
Unplug the device for 30 minutes to perform a full reset. Reconnect and try again. If the...
The program hangs and error code F4240 is indicated on the control panel.
Software or hardware malfunction within the main electronic control module.
Unplug the device for 30 minutes to perform a full reset. Reconnect and try again. If the...
The device refuses to work and displays code F4241.
The system has detected a configuration error or corruption of the internal memory of the...
Perform a reset by unplugging the device from the mains for 20 minutes. If the problem is...
The device refuses to work and displays code F4241.
The system has detected a configuration error or corruption of the internal memory of the...
Perform a reset by unplugging the device from the mains for 20 minutes. If the problem is...
The cycle does not start and error F4242 is displayed immediately.
Main control module self-test failed, indicating an unrecoverable hardware failure.
Turn off the power to the device for around ten minutes, then turn it back on. If the code...
The cycle does not start and error F4242 is displayed immediately.
Main control module self-test failed, indicating an unrecoverable hardware failure.
Turn off the power to the device for around ten minutes, then turn it back on. If the code...
Our official certified partners service Miele appliances in your area.