Access our premium database of error codes, common faults, and professional repair solutions for Scholtès appliances.
Display is unresponsive or showing garbage characters.
Fault with the display keypad or communication issue with the main board.
Check the wiring between the display and the main control board. If wiring is good, the display board likely needs replacement.
One side of the hob or specific zones are not working.
Communication error or failure of one of the power modules (for hobs with multiple modules).
This indicates an internal hardware failure, usually requiring the replacement of a power board by a qualified technician.
Machine stops during fill cycle.
Water fill problem. Could be low water pressure, kinked inlet hose, or faulty water inlet valve.
Ensure tap is fully on. Check inlet hose for kinks. Clean filter in the inlet valve. Test and replace the inlet valve if it's not opening.
The selected cooking zone indicator flashes 'L' and does not heat.
No pan is detected, the pan is unsuitable for induction, or it is not centered correctly on the zone.
Place a suitable induction-compatible pan on the center of the cooking zone. If the pan is correct, the detection coil or control board may be faulty.
Display shows 'STOP' and oven stops working, often during pyrolysis.
Indicates a critical error, often related to the door lock during a high-temperature cycle or a general control board fault.
Turn off power for 30 minutes to reset. If the error persists, check the door lock mechanism. This often requires a service technician to diagnose the control board.
Our official certified partners service Scholtès appliances in your area.