Access our premium database of error codes, common faults, and professional repair solutions for Miele appliances.
The machine displays a drying error and the temperature regulation inside the machine seems erratic.
The redundant internal air temperature sensor, which plays a crucial role in precisely...
Turn off the device before any intervention. Locate the internal air temperature sensor in...
Inconsistencies are observed in washing temperature; the cycle may be abnormally long or short.
Failure of the second temperature sensor (redundant 'R') in the wash tub, resulting in...
Disconnect the power supply to the machine. Access the tank area to identify the redundant...
The unit displays a system error code and refuses to start any cycle involving water temperature control.
A conflict was detected between the readings of the main and redundant water temperature...
Cut off the electrical current. Identify the location of the two water temperature sensors....
The drying program does not work correctly, the laundry remains damp or, conversely, is overheated at the end of the cycle.
The main drying air temperature sensor is faulty, disconnected, or providing erroneous data...
Turn off the appliance from the electrical circuit. Locate the main temperature sensor in...
The device reports an error and interrupts the current cycle, because the temperature inside the tank does not correspond to the expected values.
The entire internal air temperature measurement system (including the NTC probe, its wiring...
Unplug the device from the mains. Check the entire internal air sensor circuit, from the...
The progress of the device cycle is disrupted, with intermittent errors linked to ambient temperature management.
A problem has been detected in the outside air temperature measurement system, which...
Turn off the power supply. Locate the outside air temperature sensor. Inspect its physical...
The appliance is experiencing water heating errors, cycles are interrupted, or wash temperatures are visibly incorrect.
The water temperature measurement system, including the NTC sensor and its wiring, presents...
Turn off the device for safety reasons. Examine the water temperature sensor and all of its...
The appliance fails to produce steam or the water is not heated properly in the boiler.
The water temperature sensor (NTC probe) which is specifically located in the boiler is...
Disconnect the power supply. Access the boiler compartment. Check the temperature sensor...
The drying performance of the device is poor and an error code related to air circulation or measurement is displayed.
A general failure of the air measurement system is suspected. This could include a faulty...
Turn off the device. Inspect all components related to measuring air characteristics. Clean...
The device does not respond to any commands, does not start or certain specific functions are inaccessible via the control panel.
The key selector (used as a safety or operating mode switch) is defective, incorrectly...
Make sure the key is correctly inserted and turned to the correct position. Turn off the...
It is impossible to select a program, the rotary knob turns without effect or the program displayed does not correspond to the position of the selector.
The program selector (rotary encoder) is physically damaged, dirty, or its electrical...
Disconnect the device from the electrical network. Carefully remove the selector knob and...
The device does not detect the insertion of the cart or basket, preventing any cycle from starting.
The cart's identification system, which may be a magnetic sensor, switch or RFID reader, is...
Check that the cart or basket is correctly and completely inserted. Clean the detection...
The device displays a critical error code and shuts down completely, often related to the drying or ventilation system.
Failure of the drying unit valve (TA-Ventil). This is a complex component that requires...
Note precisely the error code displayed. Turn off the device for safety reasons. It is...
The drying process is excessively slow or completely ineffective, and an airflow error message is displayed.
The volumetric flow rate of air inside the drying unit (TA) is insufficient. The most...
Turn off the device. Carefully clean all accessible filters (lint filter, base filter,...
No steam is produced and the device reports a water level or boiler filling fault.
The water level in the boiler is incorrect (too low or too high), which may be due to a...
Turn off the power supply. Check that the water inlet tap of the device is open. Access the...
A preventive maintenance message appears on the screen, indicating that programmed operating time #1 has been reached.
The device has reached a threshold of operating hours predefined by the manufacturer,...
Consult the user manual or technical documentation to identify the required maintenance...
The device displays a service alert to the user, reporting that operating hours counter #2 has expired.
A second operating hours threshold has been reached, indicating the need to perform another...
Refer to the device documentation to determine the maintenance procedure associated with...
A maintenance notice is displayed, relating specifically to the drying unit (TA).
The drying unit operating hours counter (Trocknungsaggregat) has reached its programmed...
Perform periodic maintenance on the drying unit as specified in the manual (thorough...
The device displays a clear notification requesting replacement of the fine filter, and a drop in performance may be observed.
The fine filter is clogged with particles or has reached its maximum life, restricting...
Obtain an original Miele replacement fine filter. Turn off the device. Locate the fine...
A message on the control panel indicates that it is time to replace the coarse filter.
The coarse filter has accumulated an excessive amount of debris or has reached the end of...
Purchase a Miele certified replacement coarse filter. Turn off the device. Locate and open...
A scheduled service message appears, indicating that operating time counter #5 has expired.
The device has reached an additional operating milestone, requiring a specific check or...
Refer to the detailed service guide or contact Miele technical support for the exact...
The device screen displays a clear maintenance notification for operating time counter #6.
An additional usage threshold, set by the manufacturer, has been exceeded, triggering an...
Identify the maintenance task that corresponds to this counter by consulting the technical...
A general message such as 'Maintenance required' or a service icon (often a wrench) is constantly displayed on the screen.
The device has reached a general maintenance interval, calculated based on the total number...
It is strongly recommended that a qualified Miele technician carry out a complete service...
The device displays a serious system error, often with a 'Call Service' message, and stops working.
A communications problem or hardware failure has been detected on the first secondary...
Attempt a complete reset by unplugging the device from the mains for at least 10 minutes....
The device has completely failed and is displaying a critical error code related to the electronic control system.
A communications fault or hardware failure has been detected on the second secondary...
Perform an electrical reset of the device by cutting off its power for several minutes. If...
The device displays a status message, usually at the end of a cycle or diagnostic test, confirming that everything went well.
This is a notification and not an error. The device confirms that all parameters required...
No corrective action is required. This code is purely informative and indicates the success...
The cycle is interrupted before the end and the device signals that the conditions required for the program to run correctly have not been met.
One or more of the critical process parameters (e.g., target temperature was not reached...
Check potential external causes depending on the cycle: water inlet, network pressure,...
The device displays code F1082 and refuses to boot, indicating a software version problem.
An incompatibility has been detected between the installed Profitronic software version and...
This error requires specialized intervention. Contact Miele customer service so that a...
The F1083 code appears on the screen, indicating an anomaly in the programming parameters.
Profitronic module programming parameters (P) are corrupted, missing or inconsistent.
Complete reprogramming of the control module is essential. It is imperative to call Miele...
The device reports error F1084, indicating a conflict in internal configuration settings.
Device-specific configuration parameters (C) in the Profitronic module are incorrect or...
1. Disconnect 230V mains power for 3 minutes. 2. Inspect wire harness and edge connectors...
Our official certified partners service Miele appliances in your area.