Access our premium database of error codes, common faults, and professional repair solutions for Miele appliances.
The program is interrupted prematurely with an alert indicating a malfunction of dosing system 1.
An anomaly has been detected on internal dosing circuit 1. The cause may be a blockage, a...
Cancel the current program and turn off the appliance. Check the compartment and visible...
The device reports an operating problem with dosing system 2 and pauses the cycle.
The internal automatic dosing system 2 is experiencing an error, possibly due to a clogged...
Reset the device by unplugging it for a few minutes. Inspect the dosing system 2 reservoir...
An error code appears, specifying a fault on dosing system 3, preventing the cycle from continuing.
Dosing circuit 3 is faulty. This may be caused by inadequate detergent viscosity or an...
Check that the product used in tank 3 is compatible and not expired. Clean the compartment....
The screen displays an error relating to dosing system 4, and the program cannot be completed.
Anomaly detected by the electronics of the device on dosing system 4, possibly linked to a...
Perform a complete reboot of the device. Make sure that dosing compartment 4 is clean and...
The washing machine stops and reports a technical fault on the dosing system 5.
The number 5 integrated dosing system is not working as expected, which may be due to a...
Refer to the device manual for dosing system maintenance instructions. Carry out the...
The washing cycle is stopped by a critical error concerning the dosing system 6.
The dosing system 6 has a hardware or software error which prevents the correct...
Try running a program without using automatic dosing to confirm if the rest of the device...
A maintenance alert for Dosing System 7 displays, interrupting all operations.
The control module has identified a performance problem or fault on dosing circuit 7.
Check reservoir 7 to ensure it is properly inserted and clean. Restart the machine. If the...
The device displays a fault code pointing to an anomaly on the dosing system 8.
An electrical or mechanical malfunction affects the dosing system pump or sensor 8.
Turn off the device for several minutes. During this time, visually check dosing...
The washing machine has stopped and shows an error related to dosing system 9.
Automatic dosing system 9 is faulty, probably due to a faulty electronic component or a...
Perform the dispensing system cleaning procedures described in the user manual. If the...
An error indicates a problem with external dosing system 1, and the program is suspended.
Communication or operation of the external dosing system connected to port 1 is faulty. The...
Inspect the physical connection between the device and the external dosing module 1. Ensure...
The device signals a fault on external dosing system 2 and interrupts the cycle.
The external dosing system connected to input 2 encounters an anomaly (blocked pump,...
Check the power supply to the external dosing module 2. Check the integrity of the pipes...
An error code linked to external dosing system 3 is displayed, stopping the machine.
Malfunction of external dosing module 3 or connection problem with the main device.
Disconnect then reconnect the connector of the external dosing system 3. Inspect the path...
The operation is stopped due to a problem detected on the external dosing system 4.
The washing machine does not receive the correct operating signal from the external dosing...
Reset the system by turning off the device and external module. Check that the external...
The screen displays a maintenance alert for the external dosing system 5.
A communications error or hardware failure affects the external dosing system connected to...
Check the wiring and piping between the machine and the dosing system 5. Make sure the...
The program stops reporting an anomaly on the external dosing system 6.
External dosing module 6 does not respond correctly to commands from the main unit.
Examine connections and condition of system hoses 6. Check product level. Restart both...
An error message indicates a problem with the external dosing system 7.
The external dosing system 7 is either faulty, incorrectly configured or connected to the...
Refer to the installation manual of the external dosing system 7. Check all connection...
The device faults, displaying an error relating to the external dosing system 8.
Hardware or connection problem with the external dosing module connected to input 8.
Inspect the entire dosing system circuit 8, from the product container to the machine....
The cycle is interrupted by a fault alert on the external dosing system 9.
The external dosing system 9 is not functioning properly, which may be due to a failure of...
Check the power supply and connections of module 9. Make sure that the detergent has not...
An information message is displayed asking to fill the dosing system tank 1.
The level sensor has detected that the product tank for dosage 1 is below the minimum...
Open the product drawer or dedicated compartment. Fill the DOS 1 tank with the appropriate...
The device displays an alert indicating that Dosing System 2 container needs to be refilled.
The liquid level in dosing tank 2 is insufficient to ensure accurate dosing in future cycles.
Access the internal dosing system. Pour the appropriate detergent into the DOS 2 tank,...
A notification on the control screen invites you to top up the dosing tank 3.
The product volume in dosing compartment 3 is too low, triggering the level sensor alert.
Locate dosing tank 3. Fill it with the product recommended by the manufacturer to the...
The device signals that the tank for dosing system 4 is empty.
The tank 4 level sensor has detected an absence or insufficient quantity of product.
Open the dosing system access panel. Fill the DOS 4 tank with the appropriate fluid. Make...
A message asks you to fill dosing container 5.
The management system has determined that the product level in tank 5 is no longer sufficient.
Identify the dosing tank 5. Top up with the corresponding product (detergent, softener,...
The washing machine notifies that the external container connected to dosing system 6 is empty.
The external product container for dosing circuit 6 is empty or the suction tube is no...
Check the product level in the external container of the DOS 6. Refill or replace the...
The screen displays an alert to fill the external container of the dosing system 7.
The system has detected a lack of product in the external power source for dosing 7.
Locate the external container corresponding to dosage 7. Fill it or replace it with a full...
A filling request for the container of the external dosing system 8 appears on the screen.
The external detergent container for circuit 8 is empty.
Replace the empty dosing system container 8 with a new one. Make sure the hose connections...
The device signals that the level of the external container for dosage 9 is too low.
The product can connected to the external dosing system 9 is almost or completely empty.
Top up or change the product container for the dosing circuit 9. Completely immerse the...
A message on the screen asks to fill the external dosing tank and the program refuses to start.
The level of detergent or additive in the external dosing module is insufficient to...
1. Identify the external dosing compartment indicated by the device. 2. Open its lid and...
The device interrupts its cycle at the beginning, signaling a problem with the cold water supply.
The cold water supply valve is closed, the inlet hose is kinked, or the solenoid valve...
1. Check that the wall-mounted cold water faucet is fully open. 2. Make sure the supply...
The program faults because the device is not filling hot water correctly.
The hot water supply is interrupted, either by a closed faucet, a pinched pipe, or a...
1. Check that the hot water inlet tap is open to the maximum. 2. Examine the supply hose...
Our official certified partners service Miele appliances in your area.