Refrigerator Evaporator Sensor Failure
The sensor monitoring the evaporator coil temperature in the fridge section has failed.
The evaporator sensor needs to be tested and likely replaced. This may require professional service.
Access our premium database of error codes, common faults, and professional repair solutions for Hoover appliances.

Refrigerator Evaporator Sensor Failure
The sensor monitoring the evaporator coil temperature in the fridge section has failed.
The evaporator sensor needs to be tested and likely replaced. This may require professional service.
Hoover F3: NTC temperature sensor signal out of range (open or short circuit) in Oven / Microwave.
The oven has detected a temperature that is dangerously high. This could be a faulty sensor, stuck relay, or cooling fan issue.
Allow the oven to cool completely. Check the cooling fan for operation. Test the NTC sensor and main control board relays.
Freezer Evaporator Sensor Failure
The sensor monitoring the evaporator coil temperature in the freezer section has failed.
The freezer evaporator sensor needs to be tested and replaced by a qualified technician.
Hoover F6: Motor drive or inverter rotation anomaly in Oven / Microwave; drum/motor fails to spin at target RPM.
The motorized door lock for the pyrolytic cleaning cycle is jammed or faulty.
Check for obstructions around the door lock mechanism. Test the lock motor and switches, and replace the assembly if needed.
Hoover H: Operational cycle fault detected during Hob / Cooktop program execution.
The cooking zone is still hot to the touch after use. This is a safety feature, not an error.
Wait for the 'H' to disappear before cleaning or touching the glass surface.
Hoover L: Door lock safety interlock fault in Hob / Cooktop; door switch contact fails to close or open.
The child safety lock feature is turned on, disabling the controls.
Press and hold the key or lock symbol for several seconds to deactivate the child lock.
Hoover STOP: Operational cycle fault detected during Oven / Microwave program execution.
This message appears if there was a power outage during a cooking cycle. The program needs to be reset.
Turn the function selector knob to the 'Off' position and then re-select the desired cooking function to restart.
Our official certified partners service Hoover appliances in your area.