Access our premium database of error codes, common faults, and professional repair solutions for FAGOR appliances.
Internal water distribution issue.
The diverter valve, which directs water to the upper or lower spray arms, is stuck or faulty.
Inspect the diverter valve and its motor for correct operation. It may need to be cleaned or replaced.
High temperature alarm is active.
The internal temperature is too warm. This can be caused by the door being left open, loading a large amount of warm food, or a fault in the cooling system.
Ensure the door is fully closed and seals are intact. Allow time for the unit to cool after loading. Clean the condenser coils at the back or bottom of the unit.
FAGOR I20: Water drainage failure detected in Dishwasher; drain pump cannot evacuate water within safety time limit.
Drain filters are blocked with food debris, or the drain hose is obstructed.
Pause the cycle. Remove and thoroughly clean the filters in the bottom of the dishwasher. Check the drain hose is not kinked.
Anti-flood device activated / Leak detected
Water has leaked into the base tray of the appliance, triggering the safety float switch.
Disconnect from power. Check for visible leaks from hoses or the door seal. May require a technician to find the source of the leak.
Our official certified partners service FAGOR appliances in your area.